Rainwater treatment System
Rainwater harvesting system collects rain water which contains low level of contaminants. This collected water passes clarifier and simple filtration equipment. This treated rainwater can be used as non-portable purpose water. As its structure is simple and convenience, our rainwater treatment system doesn't require special maintenance.
Process Diagram
Rainwater Treatment Process
Specification of each process
Specification of each process
Process |
Description |
Remark |
Extract of First Flush |
Due to high level of contaminants, first flush is not stored. From the point, rainwater is collected in first clarification tank. A telemeter controls quantity of rainwater depends on the amount for rainfall.
|
- |
1st rainwater clarification |
Rainwater passes a screen bar and transfers to filtration by first clarification pump. If the amount of rainfall causes overflow, stored water is drained.
|
- |
2nd rainwater clarification |
The treated rainwater is stored to be used as non-portable purpose water.
|
- |
Regulation and Statues
Installation Objects for Rainwater Harvesting and Treatment
-
- Objects:
-
Facilities that have wide roof surfaces such as sport complexity and indoor gymnasium.
-
- Size:
-
Roof surface should be 2,400㎡ or more, and stands should be 1,400 or more.
-
- Time of Application:
-
Facilities that were given first construction permission.
Requiring criteria for rainwater harvesting and reuse system.
- Rainwater shall be collected from either roof surface or land surface.
- It shall have equipment for excluding initial rainwater and shall have filtration to eliminate contaminants.
-
- Rainwater Storage Tank
-
- Volume: Building Area (㎥) x 0.05 ton (large building)
- Shall have structure that prevents sunlight which causes evaporation and introducing of contaminant.
- Shall be convenient to clean
- Shall have effluent pumps that can drain water in 5 hours.
Operation and Maintenance
- Shall install distinguishable pipe line for rainwater from other pipe line.
- Shall test operation and maintenance at least twice in a year, and shall have written management registry
Aids for installing rainwater harvesting and reusing facility
- Governmental aids for installing rainwater harvesting and reusing facility.
- A municipal ordinance which can reduce cost of water bill is also able for facilities.
Penalty
- Facilities without harvesting rainwater and reusing system shall be charged fine under 10,000,000 won.
Process Diagram
Control and communication system
Benefit
- Collects rainwater which contains low level of chemical and biological contaminants.
- Rain can be used for various purposes.
- Economical by using treated rain water instead of tap water.
- Convenience in maintenance due to its auto backwash system.
- Economical Initial cost.
- Convenience in monitoring and controlling through PLC and communication system.
Qualification
Qualification |
Patent No. 0702809 |